| Our Movement Sensor with
Sound Monitor detects your baby's slightest movements, even
while she sleeps. While it may seem that your baby is
perfectly still when she is sleeping, she really isn't.
An alarm will
sound alerting you to check your baby only if she becomes
absolutely still for 20 seconds and
no movement whatsoever is detected.
The under-the-mattress Sensor Pad
detects your baby's slightest movements. If your baby goes
absolutely still for 20 seconds, the Sensor Pad sends a
signal to the Nursery Unit which sounds an alarm alerting
you to check your baby. If you are out of the baby's room,
the portable Parents' Unit (Sound Monitor) will pick up the
alarm as well as other nursery sounds. In addition, the
Nursery Unit has an optional "tic" feature. If the Sensor
Pad senses movement, the Nursery Unit will continuously
tick. If it doesn't, the ticking will stop.
Your crib must have a hard flat surface.
If it does not, just place a piece of masonite or a board
under the mattress and place the Sensor Pad on top of the
masonite and under the mattress. You may order the masonite
directly from us. Be sure to place the correct side of the
Sensor Pad facing up.
The BébéSounds® Movement Sensor will
give you the peace of mind you won't get from just a sound
monitor or even a video monitor.
And, this monitor is an excellent value. It is 2 monitors in
1 so you don't have to purchase a sound monitor.
The Angelcare Movement Sensor with Sound
Monitor can only be used to monitor one baby at a time. If
you have twins you will need to purchase 2 complete units.
Please remember that the babies will have to sleep in
separate cribs for these monitors to work properly. You will
not be able to use Angelcare for more than 2 babies at a
time because the monitor only has 2 channels.
The Movement Sensor with Sound Monitor
includes an under-the-mattress Sensor Pad, a Nursery Unit, a
Parents' Unit (sound monitor) and two AC adapters. It can
also operate with 8 AAA batteries (not included).
Model #AC201 |
